Portable, accumulator-powered precision measuring instrument with immediate indication of the measured value directly in mcd·m-2·lx-1 with measured value memory, PC and printer port

Application areas:

-  Determination of the night and/or day visibility of road markings,    independent on weather and daytime, on the road or in the    laboratory

-  Quality control

-  Long-term product comparison, product evaluation

-  Checking of road markings after application and during warranty

-  Decision on required renewal

Approved by BASt, Germany and LCPC, France

Visual testing instrument for the smaller budget

Application areas:

-  Determination of night visibility as for the ZRM 1013+, however based    on a visual determination of retroreflection by comparing the two    built-in and exchangeable comparison standards with the road marking to be tested.

Versions:

with 1 simulation distance  15 m or 30 m, adjusted

with 2 simulation distances  15 m and 30 m, reversible

with 3 simulation distances  15 m, 30 m and 50 m, reversible

Portable, accumulator-powered and sturdy precision reflectometer for the determination of lightness and hiding power

Application areas:

-  Determination of day visibility of road markings (whiteness)

Single-angle-version:      45/0°

Precision measuring instrument fort he determination of the coefficient of retroreflection R’ with immediate indication of the measured value directly in cd·lx^-1·m^-2, Data storage as well as PC and as option also GPS- and barcode reader connection

Application areas:

·       Determination of night visibility of traffic signs, in the field and laboratory use

·       for all types and colours of retroreflective materials

Approved by BASt, Germany

Test apparatus for the determination of the flow time of liquids

Application areas:

- The flow cup is an important test apparatus for the rapid and simple determination of the flow time of liquids

- The test can be carried out in the laboratory and during manufacture

Versions:

ZFC 3010:   FORD cup in accordance with ASTM with fixed jet No. 1, 2, 3, 4 or 5

ZFC 3011:     Flow cup with fixed jet of 4 mm in accordance with DIN

ZFC 3012:  Immersion flow cup with handle and fixed

jet of 4 mm

ZFC           Flow cup in accordance with ISO EN DIN ASTM with fixed jet 3, 4, 5 or 6 mm

Applicator for universal use, with adjustable gap height

Application areas:

- Preparation of uniform films of road marking paints, other coating materials, adhesives and similar products on plain substrates for testing purposes

- Preparation of wedge-shaped layers

Setting range of gap height:       0 µm to 3000 µm

Standard widths:     60 mm, 80 mm or 100 mm

Customer versions (gap height / film width)

 are available on request.

Application area:

- By this design the product to be applied is filled into the frame for preparation of uniform films of coating materials, adhesives and similar products on plain substrates for testing purposes. It also ensures that the product will not get below the guide surface

Versions:          Gap heights in µm          Film width in mm

ZAF 2010:         30/60/90/120                 60

ZAF 2011:         30/60/90/120                 80

ZAF 2012:         50/100/150/200              60

ZAF 2013:         50/100/150/200

on request until 200 mm

Customer versions (gap height/film width)

 are available on request

 Gauge for testing the drying behaviour.

 Application  areas:  

- Laboratory method for testing coating materials and fillers for drying, shrinking, cracking and porosity

Laboratory test equipment for the

determination of the drying time

Application areas:

- Determination of the drying time of road marking paints after application in the laboratory

The drying time wheel simulates the bearing pressure of a car tyre when passing over a road marking

Application areas:

- Determination of the thickness of liquid coatings on smooth surfaces

Versions:          Testing range:

ZND 2050:    25 µm to 2000 µm

ZND 2052:  100 µm to 950 µm, in steps of 25 µm

ZND 2053:        2 mm to 10 mm

Multi-purpose tool for testing surfaces

Application areas:

-  Wet-film comb gauge for testing the film thickness

-  Cross-cut tester for the assessment of the adhesion of single and multi-coat systems

Assessment of the adhesion of single

or multi-coat systems

Application areas:

-  for universal use

-  suitable for all standards, film thicknesses and substrates.

Folding ruler with 3 mm shims and NT-cutter

Handy and sturdy precision measuring instrument

Application areas:

-  For digital measurement of the dry film thickness of road markings and similar coatings

-  For all types of road markings with and without reflective beads

-  Direct measurement on site on the road or of samples in the laboratory

Measuring range:   -12,5 mm to + 12,5 mm

Resolution:   10 µm

Application areas:

-  Gauge for the rapid determination of dry film thickness of road markings or similar coatings

-  For all types of road markings with and without aggregates and reflective beads

-  Direct measurement on site on the road or of samples in the laboratory

Testing range:   1mm to 10 mm

Resolution:       0,1 mm

Comprehensive equipment for

internal control and control checks

Application areas/measuring data:

-  Temperature of air, ground and marking materials

-  Relative humidity

-  Wet film thickness

-  Amount of reflective beads/aggregates

-  Embedding of reflective beads/aggregates

Versions:

ZMK 5050:  complete set

ZMK 5051:  complete set with additional ZMM 5000 Digital marking gauge

ZMK 5052:  complete set with additional ZMP 5010 Marking-wedge gauge

ZMK 5053:  complete set with additional ZMM 5000 and ZMP 5010

ZMK 5054:  with customer-specified contents